Electrician On The SpotConsett

Consumer unit upgrades

Consumer Unit Upgrade Electrician in Consett

An old fuse box, or a board where one trip kills half the house? A new consumer unit protects every circuit on its own, and most swaps are done in a day.

With a split-load board, one faulty heater can take out every socket downstairs. RCBOs protect circuits one by one, so a fault only switches off where it is.

We test the existing circuits before swapping, because a new board will show up faults the old one missed. After that, everything is labelled and certified.

Time for a new board if

  • It still has fuse wire
  • There is one RCD for everything, or none
  • It is plastic, not metal
  • It buzzes or has scorch marks
  • Nothing is labelled
  • You are adding a charger, solar or an extension

How a board swap works

  1. Test

    Circuits and earthing first.

  2. Fit

    Metal board, every way labelled.

  3. Certify

    Notified under Part P.

Fuse boards in Consett

Consett grew from a village of 145 people in 1841 into a steel town, so it has rows of older terraces as well as the newer homes built on the old steelworks land since 2000. The older houses are the ones most likely to still have an early board.

Consumer unit questions

How long does it take?

Usually a day.

Does it have to be metal?

Yes, since 2016.

What paperwork do I get?

An installation certificate and a Building Regulations certificate.

New consumer unit?

Send us a photo of your board.

Call 01207 801038